ARCTHERM-105
The inverter air plasma cutting machine is suitable for both cutting and gouging, with high digitization degree, high control accuracy, system response block, good cutting quality, smooth incision, long service life of torch consumables; The plasma cutter can be matched with automatic cutting machine tools, without machine tools, operators hand-held cutting, suitable for all kinds of sites, easy to use outdoors.
The inverter air plasma cutting machine is suitable for both cutting and gouging, with high digitization degree, high control accuracy, system response block, good cutting quality, smooth incision, long service life of torch consumables; The plasma cutter can be matched with automatic cutting machine tools, without machine tools, operators hand-held cutting, suitable for all kinds of sites, easy to use outdoors.
category:
Product Details
|
Parameter |
Data | ||
|
Arc ignition method |
Non high-frequency arc ignition |
||
|
Arc voltage output ratio |
1:1，1:20，1:21.1，1:30，1:40，1:50， Factory settings1：1 |
||
|
Cooling method |
Air-cool |
||
|
Quality cutting thickness (carbon steel) |
12 mm |
20 mm |
|
|
Production perforation thickness (carbon steel) |
16 mm |
20 mm |
|
|
Maximum cutting capacity |
25 mm |
40 mm |
|
|
Power cooling method |
Forced air cooling |
||
|
Insulation level |
F |
||
|
Degrees of protection provided by enclosure |
IP21S |
||
|
External dimensions (length × wide × High） |
620*270*474 mm |
||
|
Weight |
40 kg |
||
|
Parameter |
Output power | ||
| 65A | 105A | ||
| Input voltage and frequency | 3Φ 400V±15% 50/60Hz | ||
| Input Current | 19.3A | 33.8A | |
| Input power | 13.4KW | 23.4KW | |
| Input capacity | 13.4K VA | 23.4K VA | |
| No-load voltage | 348 V | 348 V | |
| Power factor | 0.72 | 0.76 | |
| Efficiency | 92.5% | 94.3% | |
| Ambient temperature | -10℃～+40℃ | ||
| Duty cycle | 100%（40℃） | ||
| Cutting current/voltage | 65/139 A/V | 105/160 A/V | |
| Current range | 20～65 A | 30～105 A | |
last
next
last
next
Related Products
Product Message